| Alternative NSN: 2520-00-943-8475 |
| Item Name: Shaft Axle Automoti |
| CAGE Code : 95685 , 98750 , 98296 |
| NIIN: 009438475 |
| FSC Name: 2520 Vehicle Power Transmission Components |
| NCB Code: USA (00) |
| Manufacturers: marathon le tourneau co , san antonio air logistics center , standard manufacturing co inc |
|
Part No Part No
|
Manufacturer |
Item Name Item Name
|
QTY QTY
|
RFQ RFQ
|
|---|---|---|---|---|
| 653-5226-13 | marathon le tourneau co | shaft axle automoti | Avl | |
| 65D35226-13 | marathon le tourneau co | shaft axle automoti | Avl | |
| 65D35226 13 | san antonio air logistics center | shaft axle automoti | Avl | |
| 65D35226 9 | san antonio air logistics center | shaft axle automoti | Avl | |
| 65D35226-13 | standard manufacturing co inc | shaft axle automoti | Avl |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 12.781 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | 42.0 MAXIMUM ROCKWELL C |
| AMDM | FIRST END SPLINE LENGTH | 1.619 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.265 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.495 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 1.750 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 1.136 INCHES NOMINAL |
| AMHL | SECOND END BEARING SEAT DIAMETER | 1.312 INCHES NOMINAL |
| AMHM | SECOND END DISTANCE FROM BEARING SEAT TO END | 2.750 INCHES NOMINAL |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| BBCD | FIRST END SPLINE QUANTITY | 6 |
| BBCF | SECOND END SPLINE QUANTITY | 19 |
| BNPJ | FIRST END FACILITY DIAMETER | 1.031 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE AND SHOULDER |
| BNTC | FIRST END FACILITY WIDTH | 0.125 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| BNTD | FIRST END FACILITY LOCATION | 1.250 IN. BETWEEN GROOVE AND SHOULDER,0.312 IN. FROM END OF SHAFT |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| BNTT | SECOND END BEARING SEAT | INCLUDED |
| BNTW | SECOND END BEARING SEAT WIDTH | 1.156 INCHES NOMINAL |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| MATT | MATERIAL | STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4130 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote