| Alternative NSN: 3020-00-287-8261 |
| Item Name: Gear Spur |
| CAGE Code : 43491 , 33781 |
| NIIN: 002878261 |
| FSC Name: 3020 Gear Pulley Sprocket and Transmission Chain |
| NCB Code: USA (00) |
| Manufacturers: general signal corp , tuthill corporation |
|
Part No Part No
|
Manufacturer |
Item Name Item Name
|
QTY QTY
|
RFQ RFQ
|
|---|---|---|---|---|
| 3156SH13PC7 | general signal corp | gear spur | Avl | |
| 3156SH18PC7 | general signal corp | gear spur | Avl | |
| 3156SH14PC7 | general signal corp | gear spur | Avl | |
| 3156SH22PC7 | general signal corp | gear spur | Avl | |
| 3156SH21PC7 | general signal corp | gear spur | Avl | |
| 3156SH17PC7 | general signal corp | gear spur | Avl | |
| 3156SH25PC7 | general signal corp | gear spur | Avl | |
| 3156SH26PC7 | general signal corp | gear spur | Avl | |
| N1691-7FS | general signal corp | gear spur | Avl | |
| 3156SH13PC7 | tuthill corporation | gear spur | Avl | |
| 3156SH14PC7 | tuthill corporation | gear spur | Avl | |
| 3156SH17PC7 | tuthill corporation | gear spur | Avl | |
| 3156SH18PC7 | tuthill corporation | gear spur | Avl | |
| 3156SH21PC7 | tuthill corporation | gear spur | Avl | |
| 3156SH22PC7 | tuthill corporation | gear spur | Avl | |
| 3156SH25PC7 | tuthill corporation | gear spur | Avl | |
| 3156SH26PC7 | tuthill corporation | gear spur | Avl | |
| N1691-7FS | tuthill corporation | gear spur | Avl |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 3.2460 INCHES MINIMUM AND 3.2480 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 39 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 60.0 ROCKWELL C NOMINAL OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.375 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.750 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 1.235 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.437 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.156 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.874 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.051 INCHES FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,ALLOY NO. 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote