| Alternative NSN: 3020-00-293-4024 |
| Item Name: Gear Helical |
| CAGE Code : 72915 , 55380 |
| NIIN: 002934024 |
| FSC Name: 3020 Gear Pulley Sprocket and Transmission Chain |
| NCB Code: USA (00) |
| Manufacturers: general motors corp , hatch and kirk inc |
|
Part No Part No
|
Manufacturer |
Item Name Item Name
|
QTY QTY
|
RFQ RFQ
|
|---|---|---|---|---|
| 3230072 | general motors corp | gear helical | Avl | |
| 3230072 | hatch and kirk inc | gear helical | Avl |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 8.6250 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 69 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF AXIALLY THROUGH BODY,SECOND END |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 24 AXIALLY THROUGH BODY,SECOND END |
| CQFM | HARDNESS RATING | 10.0 ROCKWELL C MINIMUM OVERALL AND 20.0 ROCKWELL C MAXIMUM OVERALL |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.375 INCHES AXIALLY THROUGH BODY,SECOND END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 4 PLAIN AXIALLY THROUGH BODY,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 4 THREADED AXIALLY THROUGH BODY,SECOND END |
| CWFR | NOMINAL OVERALL LENGTH | 2.062 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 25.81635 DEGREES |
| CWRS | BORE NOMINAL DIAMETER | 4.375 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 6.750 INCHES FIRST END |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.500 INCHES AXIALLY THROUGH BODY,FIRST END |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 5.250 INCHES AXIALLY THROUGH BODY,FIRST END |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 5.250 INCHES AXIALLY THROUGH BODY,SECOND END |
| FEAT | SPECIAL FEATURES | OUTSIDE DIAMETER 8.873MIN. 8.875MAX. IN. BORE PROVISION INCLUDED BORE LENGTH 0.438 IN. FACE WIDTH 1.745MIN. 1.755MAX. IN. DISTANCE FROM FIRST END HUB END TO FACE OF GEAR 0.3075MIN. 0.3175MAX. IN. DEPTH FROM SECOND END FACE OF TEETH TO |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote