| Alternative NSN: 3020-00-499-4242 |
| Item Name: Gear Spur |
| CAGE Code : 54641 , 16460 |
| NIIN: 004994242 |
| FSC Name: 3020 Gear Pulley Sprocket and Transmission Chain |
| NCB Code: USA (00) |
| Manufacturers: lear siegler inc , marine engine specialties |
|
Part No Part No
|
Manufacturer |
Item Name Item Name
|
QTY QTY
|
RFQ RFQ
|
|---|---|---|---|---|
| 2723 | lear siegler inc | gear spur | Avl | |
| 2723 | marine engine specialties | gear spur | Avl |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 0.7500 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 22 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH HUB,FIRST END |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 AXIALLY THROUGH HUB,FIRST END |
| CQFM | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.312 INCHES AXIALLY THROUGH HUB,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN TRANSVERSELY THROUGH HUB,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED AXIALLY THROUGH HUB,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.000 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.2500 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.3750 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.750 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.8755 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.1870 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.5295 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 1.2500 INCHES SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 1.6625 INCHES FIRST END |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.125 INCHES AXIALLY THROUGH HUB,FIRST END |
| FEAT | SPECIAL FEATURES | POSITION OF KEYWAY MUST BE CENTERED BETWEEN TEETH |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote