| Alternative NSN: 3020-01-120-3420 |
| Item Name: Gear Spur |
| CAGE Code : 15531 |
| NIIN: 011203420 |
| FSC Name: 3020 Gear Pulley Sprocket and Transmission Chain |
| NCB Code: USA (01) |
| Manufacturers: machine components corp |
|
Part No Part No
|
Manufacturer |
Item Name Item Name
|
QTY QTY
|
RFQ RFQ
|
|---|---|---|---|---|
| SP-367 | machine components corp | gear spur | Avl |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 2.2500 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 72 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB,FIRST END |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AND 1 THREADED TRANSVERSELY THROUGH HUB,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.312 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.047 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.015 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.188 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.312 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 0.375 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.203 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 0.562 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.812 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 2.195 INCHES FIRST END |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.086 INCHES TRANSVERSELY THROUGH HUB,FIRST END |
| MATT | MATERIAL | STEEL COMP 416 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND H,CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH NO.5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote