| Alternative NSN: 3020-01-251-0108 |
| Item Name: Gear Spur |
| CAGE Code : 29964 , 00141 , 29440 |
| NIIN: 012510108 |
| FSC Name: 3020 Gear Pulley Sprocket and Transmission Chain |
| NCB Code: USA (01) |
| Manufacturers: allied devices corp , roller bearing company of america , w m berg inc |
|
Part No Part No
|
Manufacturer |
Item Name Item Name
|
QTY QTY
|
RFQ RFQ
|
|---|---|---|---|---|
| DG81T64 | allied devices corp | gear spur | Avl | |
| G81-64 | roller bearing company of america | gear spur | Avl | |
| P32S34X 64 | w m berg inc | gear spur | Avl |
| MRC | Criteria | Characteristic |
|---|---|---|
| CMLK | Mounting Hole Thread Series Designator | UNF TRANSVERSELY THROUGH HUB, FIRST END" |
| CMLM | Mounting Hole Thread Quantity Per Inch | 32 TRANSVERSELY THROUGH HUB, FIRST END" |
| MATT | Material | STEEL COMP 303 OVERALL |
| ANTP | Bore Style | PLAIN BOTH ENDS |
| CQLT | Mounting Hole Nominal Thread Size | 0.190 INCHES TRANSVERSELY THROUGH HUB, FIRST END" |
| STYL | Style Designator | PROTRUDING HUB |
| FEAT | Special Features | DISTANCE FROM FIRST END OF HUB TO CENTER OF TAPPED HOLE 0.187 NOM. IN. |
| AAQL | Body Style | PLAIN, SOLID" |
| SUPP | Supplementary Features | BRAZED OR PIN AND STAKED TWO PIECE CONSTRUCTION |
| CTQY | Mounting Hole Type And Quantity | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END" |
| CWWK | Precision Classification | QUALITY NUMBER 10 |
| CWCD | Nominal Outside Diameter | 2.061 INCHES |
| CWFR | Nominal Overall Length | 0.750 INCHES |
| CWNH | Tooth Form | STANDARD |
| CWPP | Pressure Angle | 20.0000 DEGREES |
| AGJS | Pitch Diameter | 1.9990 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM |
| MDCL | Material Document And Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL AND QQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWQL | Nominal Distance Between Body Face And Protruding Hub End | 0.375 INCHES FIRST END |
| CWRM | Face Nominal Width | 0.375 INCHES |
| CWRS | Bore Nominal Diameter | 0.375 INCHES BOTH ENDS |
| CWRX | Bore Nominal Depth | 0.750 INCHES BOTH ENDS |
| CWTR | Hub Style Designator | PINNED FIRST END |
| BDZQ | Backlash Designation | GRADE C |
| CWTX | Hub Nominal Diameter | 0.750 INCHES FIRST END |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| STDC | Surface Treatment Document And Classification | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| AJLA | Teeth Quantity | 64 |
| ABSX | Attachment Method | MOUNTING HOLE |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote