| Alternative NSN: 4720-00-917-2385 |
| Item Name: Hose Assembly Nonme |
| CAGE Code : 93568 , 25169 |
| NIIN: 009172385 |
| FSC Name: 4720 Hose and Flexible Tubing |
| NCB Code: USA (00) |
| Manufacturers: harsco corporation , project manager amphibious lighters |
|
Part No Part No
|
Manufacturer |
Item Name Item Name
|
QTY QTY
|
RFQ RFQ
|
|---|---|---|---|---|
| EL12-017-41 | harsco corporation | hose assembly nonme | Avl | |
| V12-017-701 | project manager amphibious lighters | hose assembly nonme | Avl |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.078 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| ADJS | EXTERIOR COLOR | NATURAL |
| AHNC | CONNECTION STYLE | INVERTED FLARE 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 14 2ND END |
| CQBD | BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CQRB | SEAT ANGLE | 30.0 DEGREES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND FUEL RESISTANT |
| CRSM | VACUUM IN TORR | 50.8 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 55.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| MEDA | MEDIA FOR WHICH DESIGNED | AIR AND HYDRAULIC FLUID AND FUEL/OIL,HYDROCARBON AND WATER,FRESH SINGLE RESPONSEFUEL/OIL,HYDROCARBON AND WATER,FRESH SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | NPT 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote