Alternative NSN: 5305-01-512-8411 |
Item Name: Screw Close Toleran |
CAGE Code : C4293 , 06950 , 92215 , 1EM77 , 76301 , 58998 , 0ZC92 , 73197 , 1VSL7 , 17446 , 59563 , 0K6Z0 , 80539 , 06710 , 60516 |
NIIN: 015128411 |
FSG: 53 Hardware and Abrasives |
FSC Name: 5305 Screws |
NCB Code: USA (01) |
Manufacturers: alcoa fastening systems ltd , alcoa global fasteners inc , b and b specialties inc , boeing company the , emhart teknologies llc , heartland precision fasteners inc , hi shear corporation , houston precision fastener l l c , huck international inc , reid products inc , saturn fasteners inc , sps technologies inc , valley todeco inc , west coast aerospace inc |
MRC | Criteria | Characteristic |
---|---|---|
AASK | Head Style | FLAT COUNTERSUNK |
SFTT | Surface Treatment | ALUMINUM OVERALL |
AHYM | Nominal Thread Diameter | 0.190 INCHES |
AASB | Fastener Length | 0.643 INCHES MINIMUM AND 0.679 INCHES MAXIMUM |
CXCY | Part Name Assigned By Controlling Agency | BOLT, 100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS,PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR) |
AASL | Head Diameter | 0.2931 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
AASA | Thread Length | 0.345 INCHES NOMINAL |
AGAV | End Item Identification | F-18 E/F |
AAUR | Grip Diameter | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
CRTL | Criticality Code Justification | AGAV |
STDC | Surface Treatment Document And Classification | MIL-C-83488,TYPE II,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
AAJF | Thread Direction | RIGHT-HAND |
FEAT | Special Features | FINISH CETYL ALCOHOL PER MIL-L-87132,TYPE I,GRADE B |
MATT | Material | NICKEL ALLOY 718 OVERALL |
ABQZ | Internal Drive Style | TORX |
CMLP | Thread Quantity Per Inch | 3A |
AAUH | Spline Minor Diameter | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
THSD | Thread Series Designator | UNJF |
ANEE | Grip Length | 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM |
MDCL | Material Document And Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
AAUJ | Spline Major Diameter | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
MRC | Decoded Requirement | Clear Text Reply |
AAJD | Thread Class | 3A |
CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote