| Alternative NSN: 5315-00-286-0186 |
| Item Name: Pin Shoulder Headle |
| CAGE Code : 3D6E9 , 56442 , 63477 , 7X677 , 76040 , 78500 , 95201 , 62265 , 65282 |
| NIIN: 002860186 |
| FSC Name: 5315 Nails Machine Keys and Pins |
| NCB Code: USA (00) |
| Manufacturers: axletech international llc , diamond reo trucks inc , federal mogul corporation , general motors corp , mack trucks inc , meritor heavy vehicle braking system , napco international llc , volvo trucks north america inc , white motor corp |
|
Part No Part No
|
Manufacturer |
Item Name Item Name
|
QTY QTY
|
RFQ RFQ
|
|---|---|---|---|---|
| 1846S71 | axletech international llc | pin shoulder headle | Avl | |
| 250M1 | diamond reo trucks inc | pin shoulder headle | Avl | |
| F4396 | federal mogul corporation | pin shoulder headle | Avl | |
| FC4396 | federal mogul corporation | pin shoulder headle | Avl | |
| 2021947 | general motors corp | pin shoulder headle | Avl | |
| 11EJW2 | mack trucks inc | pin shoulder headle | Avl | |
| 1846S71 | meritor heavy vehicle braking system | pin shoulder headle | Avl | |
| 11A8912 | napco international llc | pin shoulder headle | Avl | |
| 4AA01138 | volvo trucks north america inc | pin shoulder headle | Avl | |
| 306948 | white motor corp | pin shoulder headle | Avl |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | SQUARE |
| AATR | SHANK LENGTH | 0.764 INCHES MINIMUM AND 0.774 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQTR | SECOND SHANK DIAMETER | 0.307 INCHES MINIMUM AND 0.309 INCHES MAXIMUM |
| CRDY | FIRST END LOCATION | LONG END |
| CRMG | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| CWAS | SECOND SHANK LENGTH | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | UNDERCUT |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote