| Alternative NSN: 5340-01-249-7660 |
| Item Name: Bracket Angle |
| CAGE Code : 76301 , 04967 , 85697 , 59570 |
| NIIN: 012497660 |
| FSC Name: 5340 Hardware Commercial |
| NCB Code: USA (01) |
| Manufacturers: boeing company the , fastener specialty inc , miller charles and co inc , trico manufacturing inc |
|
Part No Part No
|
Manufacturer |
Item Name Item Name
|
QTY QTY
|
RFQ RFQ
|
|---|---|---|---|---|
| ST9M496BC1A | boeing company the | bracket angle | Avl | |
| ST9M496BC1A | fastener specialty inc | bracket angle | Avl | |
| ST9M496BC1A | miller charles and co inc | bracket angle | Avl | |
| ST9M496BC1A | trico manufacturing inc | bracket angle | Avl |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 0.800 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| AHLZ | SECOND LEG SLOT LENGTH | 0.499 INCHES NOMINAL |
| AHMA | SECOND LEG SLOT WIDTH | 0.224 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.071 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.071 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| AHQP | FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| CBBL | FEATURES PROVIDED | NUT |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | CONVENTIONAL CLIP NUT |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 T72 OR T81 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | PRIMER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MMS425,CAGEC 04967 MFR REF SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote