| Alternative NSN: 5962-01-051-4853 |
| Item Name: Microcircuit Digita |
| CAGE Code : 01295 |
| NIIN: 010514853 |
| FSC Name: 5962 Microcircuits Electronic |
| NCB Code: USA (01) |
| Manufacturers: texas instruments inc |
|
Part No Part No
|
Manufacturer |
Item Name Item Name
|
QTY QTY
|
RFQ RFQ
|
|---|---|---|---|---|
| MPD20734W | texas instruments inc | microcircuit digita | Avl | |
| SN85581W | texas instruments inc | microcircuit digita | Avl | |
| 6088916-1 | texas instruments inc | microcircuit digita | Avl | |
| SN54367W | texas instruments inc | microcircuit digita | Avl |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 0.371 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.247 INCHES MINIMUM AND 0.285 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.050 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 275.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | -55.0 TO 125.0 DEG CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0 TO 150.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | COUNTERMEASURES SET TYPE AN/ALQ-99E V) |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND 3-STATE OUTPUT AND W/ENABLE |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | FLAT PACK |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 8 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | 6 DRIVER,BUS |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | -0-004-AG JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 5.5 VOLTS MAXIMUM POWER SOURCE |
| CZEQ | TIME RATING PER CHACTERISTIC | 21.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,LOW TO HIGH LEVEL OUTPUT AND 27.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,HIGH TO LOW LEVEL OUTPUT |
| TEST | TEST DATA DOCUMENT | 03640-6088916 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 16 FLAT LEADS |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote