| MRC | Criteria | Characteristic |
|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | STRAIGHT SHAPE,EXTERNAL COUPLING |
| ABHP | OVERALL LENGTH | 1.075 INCHES MINIMUM AND 1.105 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 0.665 INCHES MINIMUM AND 0.695 INCHES MAXIMUM |
| AFQJ | CABLE ENTRANCE DIAMETER | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.676 INCHES MINIMUM AND 0.686 INCHES MAXIMUM |
| AFQQ | MOUNTING FACILITY THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| AFQR | THREADED DEVICE TYPE | MOUNTING BUSHING |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | BNC SINGLE MATING END |
| AFQZ | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| CQTM | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT | SHELL MATERIAL | COPPER ALLOY |
| CSWM | SHELL SURFACE TREATMENT | SILVER |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE |
| CXCG | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCJ | BUSHING ACCOMMODATION HOLE SHAPE | ROUND |
| CXCL | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND SHELL SURFACES SILVER |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS,TROY AND 0.100 SILVER GRAINS,TROY |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| TEST | TEST DATA DOCUMENT | 24930-G350136 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
