| MRC | Criteria | Characteristic |
|---|
| AAPP | III ELECTRICAL RESISTANCE | 3.900 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| AAPP | III ELECTRICAL RESISTANCE | 4.300 KILOHMS 3RD INTERMEDIATE RESISTANCE VALUE |
| AAPP | III ELECTRICAL RESISTANCE | 7.500 KILOHMS HIGHEST RESISTANCE VALUE |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -3.000 TO 3.000 1ST INTERMEDIATE RESISTANCE VALUE |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -3.000 TO 3.000 2ND INTERMEDIATE RESISTANCE VALUE |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -3.000 TO 3.000 3RD INTERMEDIATE RESISTANCE VALUE |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -3.000 TO 3.000 HIGHEST RESISTANCE VALUE |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 LOWEST RESISTANCE VALUE |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 TEMP RANGE OF FIRST TEMP COEFFICIENT |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| AARA | TERMINAL QUANTITY | 9 |
| AARB | TERMINAL TYPE | PIN |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.125 INCHES MINIMUM |
| ADAQ | BODY LENGTH | 0.890 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.100 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.320 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 0.125 TOTAL NETWORK |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 3RD INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 2 1ST INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 2 2ND INTERMEDIATE RESISTANCE VALUE |
| STYL | STYLE DESIGNATOR | SINGLE INLINE |
| TEST | TEST DATA DOCUMENT | 80063-A3012860 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -200.0 TO 200.0 FIRST TEMP COEFFICIENT |
| AAPP | III ELECTRICAL RESISTANCE | 2.700 OHMS LOWEST RESISTANCE VALUE |
| AAPP | III ELECTRICAL RESISTANCE | 220.000 OHMS 1ST INTERMEDIATE RESISTANCE VALUE |
