If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload| Part Number : 9M700-1-10L | Alternate P/N : 9M700110L | NSN : 5340001624450 |
|
|
Manufacturer : Fastener Specialty Inc | CAGE Code : 04967 |
| FSC Details : 5340 Hardware Commercial | NIIN : 001624450 | INC Code : 16900 |
| Country : USA | NCB Code : 00 |
Thank You for Submitting Your RFQ for Part Number 9M700-1-10L by Fastener Specialty Inc
We always put our customers’ needs first, and we are always just a click or call away from assisting you throughout the purchasing process whenever you need it. Please do not hesitate to call our toll-free number +1-714-705-4780 for any inquiries about part number 9M700-1-10L, or send us an email listing your needs, and we will get back to you as soon as possible. Whatever your requirements may be, we will not rest until we have fulfilled all your operational needs with highly competitive options.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-162-4450 Item PartTypeName: BRACKET,ANGLE | 5340 | 001624450 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST9M380-1-10L | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 0.750 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 1.500 INCHES MINIMUM AND 1.505 INCHES MAXIMUM |
| AHLG | SECOND LEG CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.268 INCHES MINIMUM AND 0.271 INCHES MAXIMUM |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.064 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.064 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 1.500 INCHES MINIMUM AND 1.505 INCHES MAXIMUM |
| AHQP | FIRST LEG CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AHQY | FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHQZ | FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | NUT ATTACHED TO ONE HOLE OF SECOND LEG |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3,T8511 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/5,T72 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/5,T81 FED SPEC 3RD MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | PLASTIC EPOXY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MMS405,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote
