ASAP Sourcing Solutions Blog

Piper and Cessna are renowned aircraft manufacturers that have been shaping air travel for decades by delivering reliable and efficient airplanes. Whether you are a seasoned pilot or an aviation enthusiast, it is essential to understand the differences between these two brands. In this article, we will explore Piper and Cessna by comparing their offerings and highlighting their strengths, ensuring you pick the right products for your particular applications.

Svenska Kullagerfabriekn AB (SKF) was established in 1907 with headquarters in Gothenburg, Sweden. Today, it is the largest bearing manufacturer in the world employing around 45,000 people in almost 110 units. Besides bearings, SKF produces and distributes : linear motion products, seals, lubrication systems, maintenance products and condition monitoring.

Boeing, world renown aircraft OEM has stated that they will be expanding their location in Helena, Montana for further production of their newly released Boeing 777X aircrafts parts. The expansion of the Helena location will enable the facility to create an additional 90,000ft2 for excess production of twin-aisle aircrafts. With a more than 257,000ft2 to offer , Boeing Helena will be able to produce titanium parts , side-of-body chords, and terminal end fittings that are used to connect fuselage to the wings.

When it comes to flying I would assume that safety is the biggest concern before anything else, other features are obviously necessary and there is no doubt that technological advancements have made flying much easier, more fun and most importantly safer. Having said that it is important to mention that Maverich Helicopter has been awarded by the Federal Aviation Administration (FAA) an award of excellence in 2016 called the Diamond Award. The award was considered due to the company’s achievement of maintaining aircraft safety as top priority and their continuous training to ensure that safety is something critical to focus on. Maverick Helicopter didn’t receive only one award but they were awarded six Diamond Awards back to back and two years ago in 2015 they were able to receive it for their facility in Maui, Hawaii for the first time.

Aeration windmills are designed to keep water ponds clean and eco-friendly for the life that lives in them. Aeration windmills have been found to be very effective and efficient especially that they the harness the free energy that comes from the wind. This is ideal for a nonstop application of keeping clean water and saving a ton of money for that fact.

Basically windmill aeration allows the water to maintain a healthy level of oxygen, this is very important for sustaining the lives that live in that water, from fish to plants and water creatures. This also creates an eco-friendly or balanced circulation of water which reduces bacterial build up and prevents stratification. Also with the increasing the level of oxygen you have a better chance of avoiding insects like mosquitoes to lay their eggs in excess and dominating a certain area especially with the fact that mosquitoes are capable of spreading viruses.

Igus company is known for producing plastics for longer life. They produce all types of bearing parts. They are always evolving within their field. This company always looks for ways to be more convenient to its consumers. They recently have developed thin ball ring bearings. These new bearings conform to DI 625. This new bearing is adaptable for many vehicles.

They require no maintenance because they are self-lubrications and have low friction properties. This is important to know because this is how Igus company stay convenient and how they stay on top of their field. They offer only the best products that are convenient for many people.

NSK corporation is a global network offers many kinds of bearings. They have many talented engineers that are always working and designing new products that would fir individual needs. They recently developed different designs that are matched to the required main rotor bearings. It is known that many of the bearings especially while they are exposed to a lot of mechanical stress do give up at the end.

But the NSK engineers made the main bearing to be able to be exposed to very high wind loads. Aviation bearing parts are complicated and must be precise and this is exactly what the NSK engineers did. They made a precise and complicated piece that is beneficial. “It is capable of withstanding radial and axial loads, including the resulting bending movement of the rotor shaft” one source stated.

“SKF is a world leader in spherical roller bearings, manufacturing bearings of all sizes and series – from the smallest, with a 20 mm bore size, to this large size bearing that weighs close to eight tones” says Petra Öberg Gustafsson, who is a Product Line Manager for self-aligning rolling bearings at SKF. 

Many people in the mining industry have a lot of difficulties and setback that they have at there not so safe jobs, therefore SKF decided to manufacture and supply the largest spherical roller bearing ever.

This spherical roller is intended to avoid any risk with improper mounting. Improper mounting is a huge area of improvement in the mining industry and a lot of injuries and setbacks is caused by improper impounding. Therefore, manufacturing this spherical roller coaster in Gothenburg, Sweden is a big opportunity causing a lot of improvement in the mining companies.

Bearing part sourcing was the main deal to come up with this. This spherical roller bearing has a class with improved wear resistance which makes it a lot more convenient and a lot more stable. Due to thus improved SKF it was chosen it was used to manufacture large size industrial bearings.