ASAP Sourcing Solutions Blog

Threaded metal inserts have been made since the early 90s that are used in a multiple range of products and industries. Metal inserts have been used by automotive, aerospace, furniture design, military and medical applications. The first thing to know about metal inserts application is to determine the appropriate size production and the size of the hole that the insert is going into.

Next would be to twist the insert into the drill head which will be used to install the insert into the desired location of the part you are using. The way it works is because of the double thread on the insert where the inside thread is twisted on the drill and the outside thread into the hole that is found on the part that is being used. First you drill forward until insert is all the way inside the hold and is secured by the part, then you drill backwards to release the insert from the drill.

Aeration windmills are designed to keep water ponds clean and eco-friendly for the life that lives in them. Aeration windmills have been found to be very effective and efficient especially that they the harness the free energy that comes from the wind. This is ideal for a nonstop application of keeping clean water and saving a ton of money for that fact.

Basically windmill aeration allows the water to maintain a healthy level of oxygen, this is very important for sustaining the lives that live in that water, from fish to plants and water creatures. This also creates an eco-friendly or balanced circulation of water which reduces bacterial build up and prevents stratification. Also with the increasing the level of oxygen you have a better chance of avoiding insects like mosquitoes to lay their eggs in excess and dominating a certain area especially with the fact that mosquitoes are capable of spreading viruses.

Stanley has introduced a new fastener that is made to be water proof and vibrant resistant by Falmat Inc. It has been purposed be used on waterproof handhelds and can be used on “vibration -proof wearable and portables.”  As stated by the firm,” the industry has adopted the IPx7 rating, which protects against immersion in water for 30 minutes at a depth of 1 meter.”

The newest screw is designed with two different innovative technologies can perform in harsh conditions. A custom thread has been created for an average screw or bolt to be able to give the fastener a “anti-vibration characteristic.”  

Typically, these non-vibrating screws and bolts are used in a greater form to be placed on spaceship aircrafts. Spiralock has removed the need for any other anti-vibration counter measures with having the new screw that,” adds a 30° wedge ramp at the root of the thread and mates with standard 60° male thread fasteners.” The water-resistant attribute is made possible modifying the angel at which the head of the screw bends at an 87° oppose to the standard 90 degree.

Automotive Fasteners are useful in many industries. Such industries are aerospace, petrochemical, waste processing, pharmaceutical and even machine industries. Fasteners are mostly made from iron, aluminum, brass nickel and stainless steel. Many people think it is going to be only used in the automotive fasteners because of its name but as mentioned above it I sued in many other areas.

Windmills are starting to become popular. Many individuals are starting to use to them to generate power. They are large buildings (machines) that turn the wind and generate power to mainly grind grain into flour. This is an important machine now a day as it saves a lot of energy therefor saving money. these machines are very reliable and are important. They need a lot of maintenance and need to be taken care of.

Therefore, many industrial companies and manufacturers are always coming up with new machines and new objects that ease the process. For example, the aeration windmill manufacturer in the Us is one of the best for being the best solutions and best ways to have a windmill work properly.

ecause they experience a lot they have found that installing Cesocnite bearings on windmills leads to the windmill to operate much more smoothly and more efficient. It is known that the fan rotation is a main key to ensure that a diaphragm moves up the windmills are also essential for reducing algae and foul smells which creates a healthier environment for fish.

Igus company is known for producing plastics for longer life. They produce all types of bearing parts. They are always evolving within their field. This company always looks for ways to be more convenient to its consumers. They recently have developed thin ball ring bearings. These new bearings conform to DI 625. This new bearing is adaptable for many vehicles.

They require no maintenance because they are self-lubrications and have low friction properties. This is important to know because this is how Igus company stay convenient and how they stay on top of their field. They offer only the best products that are convenient for many people.

NSK corporation is a global network offers many kinds of bearings. They have many talented engineers that are always working and designing new products that would fir individual needs. They recently developed different designs that are matched to the required main rotor bearings. It is known that many of the bearings especially while they are exposed to a lot of mechanical stress do give up at the end.

But the NSK engineers made the main bearing to be able to be exposed to very high wind loads. Aviation bearing parts are complicated and must be precise and this is exactly what the NSK engineers did. They made a precise and complicated piece that is beneficial. “It is capable of withstanding radial and axial loads, including the resulting bending movement of the rotor shaft” one source stated.

“SKF is a world leader in spherical roller bearings, manufacturing bearings of all sizes and series – from the smallest, with a 20 mm bore size, to this large size bearing that weighs close to eight tones” says Petra Öberg Gustafsson, who is a Product Line Manager for self-aligning rolling bearings at SKF. 

Many people in the mining industry have a lot of difficulties and setback that they have at there not so safe jobs, therefore SKF decided to manufacture and supply the largest spherical roller bearing ever.

This spherical roller is intended to avoid any risk with improper mounting. Improper mounting is a huge area of improvement in the mining industry and a lot of injuries and setbacks is caused by improper impounding. Therefore, manufacturing this spherical roller coaster in Gothenburg, Sweden is a big opportunity causing a lot of improvement in the mining companies.

Bearing part sourcing was the main deal to come up with this. This spherical roller bearing has a class with improved wear resistance which makes it a lot more convenient and a lot more stable. Due to thus improved SKF it was chosen it was used to manufacture large size industrial bearings.

Oct 26 2015 was an important date for Iowa, well at least it was for the people in the aircraft industry. It was selected to develop a palletized aerial refueling system to enable the U.S marine corps to refuel other aircraft while in the air.

This development was the idea of Cobham. This big news and many people are happy and excited to hear that. Engineers in Iowa working constantly on modifying existing airplanes for the VARS system (v-22 Aerial Refueling system). this is not only going to help refuel plains in the air. But will also help the marine in refueling. This is very beneficial for the military and a key factor to its successes.

Wind Turbines are often times hard to maintain in good shape. Many times they fail at an early age which it is not convenient. Therefore, Schaffler at wind energy Hamburg came up with a WEC (white etching cracks) resistance rolling bearings. He explained that theses cracks are usually changes in the material structure that form below bearing raceway. Therefore, Schaffler developed a process to mainly do research and come up with causes of this WEC. He also offered special designs bearing to prevent early failure.

To be able to do this first there had to be a reproduction of WEC damage, to be able to reproduce the damage, the causes of the damage must be found and researched. Lot of testing has been done and many of the tests were hard to conclude since the causes has not been fully determined.

Research requires reliable testing methods. After a lot of testing with special engineers it has been found the Hydrogen hypothesis is the most accurate explanation. Hydrogen hypotheses “describes how, under certain conditions, hydrogen can ingress into the steel” this may cause change in the material of the microstructure.