In an ideal way, Franke wire race bearings are made by combining aluminum components, construction that is lightweight. Franke wire race bearings range extends from the element that houses of raceways and rolling elements that complete the system. These bearings allow the free choice of material and the individual design of the mating structure. This application makes it possible to tailor to the requirements of the application. The key here give the customer free reign to use their choice of materials such as plastic, carbon, or aluminum for the production of the enclosing structure. Most Franke customers have a high potential for saving by receiving pre-finished systems, thus saving drive energy and weight. You can also purchase a complete set of Franke wire race bearings that consist of the control, drive, and bearing.
A conventional steel bearing without the drive is much heavier than a lightweight Franke bearing with direct drive. The efficiency of the system is increased by there not being a need for additional components to mechanically set the bearing in transition. The engine is also designed smaller to give it the opportunity to run at higher dynamics and speed. The Franke wire-race bearing enables an individual design of the enclosing construction, as well as a free choice of material. That is why it is possible to manufacture the housing components of the bearing in an extremely thin-walled manner and tailored to the adjacent construction. Racing has always been an experimental field for innovative solutions. It appears the Franke race wire bearings are the new and improved bearings on the market for the near future.